LED/UV Builder Nail Gel 6 Colors Nail Extension Gel Kit Nude Pink Clear Hard Gel Builder Nail Strengthener Manicure Set

• How to use:

1. File your nails and clean nail surface.      

2. Apply a layer of base coat and cure for 60s.   

3. Put a nail form on your nail.        

4. Apply builder nails gel on the nails and cure for 60s-120s.

5. Remove the forms.  

6. Wipe the nail surface with slip solution.  

7. Shape the nails.  

8. Apply top coat and cure it for 120s.

• How to remove:

  1. Soak nails in a glass bowl filled with a small amount of acetone, or wrap each nail in cotton pad soaked with acetone for around 5 to 10 minutes.
  2. Product will start to become soft and you can gently file it away or slide it off using a small wooden stick.

• WARM TIPS

1.For external use only. Keep out of the reach of children.

2. Keep the builder nail gel in a cool place, tighten the gel's cap after use, and avoid direct sunlight.

3. After curing the builder nail gel, there will be a sticky layer on the nail surface. which can be easily mistaken as not dry. You can wipe the nail surface with slip solution.

4. Apply in layers. No need to apply too thickly each layer. It is necessary to keep each layer thin and smooth.

5. It is normal for the gel to be exothermic slightly when it cures: if you feel burns. move your fingers out of the light in time: wait for the heat to dissipate. and then you can re-cure.

6. Builder nail gel in the weather temperature of 0-47 °C to maintain a normal consistency. If cold weather. there may be affected by the low temperature. you can soak it in a hot water or add the right amount of foundation gel to stir it to the normal consistency.

7. After curing, there will be a sticky layer on the nail surface, which can be easily mistaken as not dry. please wipe it with slip solution.